TF-M-type far-infrared heating device

The heating device is a sealed type, suitable for all types of external reactor, enamel kettle, stills, fine slip reactor, polymerization reactor heating and other non-standard containers, with a large heating area, easy installation maintenance, long service life, heat loss, energy-saving effect is remarkable, safe and reliable, can be designed according to the specific requirements of the processing vessel dimensions, materials technology requirements, material properties, their environment, etc., can also be based on the material level changes, segmented design and manufacturing.

TF-J-type far-infrared heating device

The model is set mounted combination heating device type, suitable for all types of external heating reactor, enamel kettle, horizontal tanks and other large non-container structure slice Combined, easy installation, no formation of air heat, hot low loss, high thermal efficiency, energy-saving effect is remarkable, safe and reliable, can be designed according to the specific requirements of the processing vessel dimensions, materials technology requirements, material properties, such as their environment, but also according to the material level changes, segmented design manufacturing, especially in the Users container there are many situations can get out of the nozzle orifice processing, but also address the overall structure of the shape of wide impact of transport problems.

TF-G tubular insert type far-infrared heating device

This type heating device is inserted into a horizontal vessel (tank) or vertical autoclave internal heating, the principle is the use of the insertion tube inside the vessel far infrared radiation heating element, the heating method is suitable for rapid heating fluid flow loop, but also on the stationary heating the material in the container can also be used as the "far-infrared oil furnace" to use, particularly for large reactors, large diameter, tube and high, in the case of heating the heat transfer area by the foreign enough, the use of the heating The most ideal way to increase the heat transfer area. Which is characterized by fast heating, heat load (surface big power), long life, the material is heated evenly, the temperature difference between inlet and outlet temperature is easy to control, low heat loss, is the best way to heat a fluid, especially for coal chemical industry, Coal tar refining process is most applicable.

TF-M/J-G pipeline outsourced far-infrared heating device

The heating pipe is widely used in the form of a distillation column, catalytic process, heating fluid, etc., can also be used as the pipe insulation, which is consistent with other forms of performance advantages heating, widely used. Common diameter: Φ34, Φ57, Φ76, Φ89, Φ108, Φ125, Φ159, Φ180, Φ219, Φ325, Φ450, Φ600 over various pipe or tower, pipe diameter, length is not restricted, the process according to user requirements non-standard processing, safety explosion-proof requirements.

TF-MP type disk works far infrared radiation heating means

The heating means for the disc inside and outside the system of the serpentine pipe clip, directed form of radiant heating, and its purpose is to rapidly heat the fluid material, to feed the low temperature, the effect of high temperature, easy to control the inlet and outlet, safe and reliable equipment, the flow of gas or liquid optimal heating, maximum temperature up to 550 ℃.

GCH type far-infrared thermal oil heaters and air heaters Series

The heating means in the device adapted to the flow of heated air is also applicable to the flow of heated liquid, when the flow of air into the heating cavity means, guided by the deflector, the gas chamber in the heating apparatus for wave -flow, the heating element and the inner surface of the cavity thermal energy sufficient heat exchange, the air is heated sufficiently rapid, widespread use of the device.

YHD far infrared heat treatment series resistance

YHD-1 infrared temperature ceramic electric heater

Electric heater is an infrared heater, suitable for internal tank, FML and other large pressure vessel heating, drying, heat drying room overall heat treatment places. Dimensions 1000 × 400 × 80, the working voltage 220V, rated power 11KW and 15KW two kinds.

YHD-2-type resistance band heater

The heater is designed for furnaces and steel mills roll design, general used in high temperature furnace, the drying tunnel installation, Dimension 1000 × 800 × 90, the working voltage 220V, rated power 11KW.

YHD-3 type crawler heater

Can be made in the shape of multi-tracked heater, geometry, thickness and heat treatment visual work required to select the appropriate specifications.

YHD-4 type rope shaped heater

For working pipes, pipe fittings, elbows, valves, and other narrow difficult to expand the special shape of the rope-shaped heater is particularly suitable, also suitable for pipe heating and insulation.

YHD-5-type iron absorption heater

Apply before welding preheat, no need to install, flexible, very easy for large pressure vessels preheat heat stress treatment the most ideal way to install four magnets on the heater can be directly automated anastomosis device with carbon body.

YHD far infrared heat treatment series resistance

YHD-1 infrared temperature ceramic electric heater

Electric heater is an infrared heater, suitable for internal tank, FML and other large pressure vessel heating, drying, heat drying room overall heat treatment places. Dimensions 1000 × 400 × 80, the working voltage 220V, rated power 11KW and 15KW two kinds.

YHD-2-type resistance band heater

The heater is designed for furnaces and steel mills roll design, general used in high temperature furnace, the drying tunnel installation, Dimension 1000 × 800 × 90, the working voltage 220V, rated power 11KW.

YHD-3 type crawler heater

Can be made in the shape of multi-tracked heater, geometry, thickness and heat treatment visual work required to select the appropriate specifications.

YHD-4 type rope shaped heater

For working pipes, pipe fittings, elbows, valves, and other narrow difficult to expand the special shape of the rope-shaped heater is particularly suitable, also suitable for pipe heating and insulation.

YHD-5-type iron absorption heater

Apply before welding preheat, no need to install, flexible, very easy for large pressure vessels preheat heat stress treatment the most ideal way to install four magnets on the heater can be directly automated anastomosis device with carbon body.